| Quantity: | |
|---|---|
Y81S-5000
Y81S-5000 Double Main Cylinders Hydraulic Scrap Baling Press Machine is capable of extruding various thicker metal waste,steel turnings,REBARS and alloy, waste copper,aluminum profiles,stainless steel, scrapped car body and other shapes of metals scrap. It makes high density bales, square,octagon, cylinder different shapes are available.
By this way, the cost of transportation and burning loss can be reduced a lot. It also makes much efficient storage.
Hydraulic Scrap Baling Press Machine is mainly used in metal plants,recycling yards,waste recovery and metal refining industry. Size of compressing chamber and finished bale can be customized.
This is the hottest model for medium or large scrap yards. With double biggest main cylinders, it runs with less cycle time even for such wide chamber size. Fully automatic running with PLC system & remote control.
1) Hydraulic drive, no need special foundataion
2) Upgrade installation standard hydraulic system with better layout
3) Pressing force ranges from 400T to 1000T
4) Customized bale & chamber box size
5) Hardox steel NM500 for whole wearing plate.
◆ Fe, Al, Cu, Cr-Ni Scraps
◆ Ferrous and non-ferrous
◆ Aluminium Extrusions, UBC, Profiles
◆ Rebars, Sheets, Buckets and other Mixed Scraps
Y81S-5000 Double Main Cylinders Hydraulic Scrap Baling Press Machine is capable of extruding various thicker metal waste,steel turnings,REBARS and alloy, waste copper,aluminum profiles,stainless steel, scrapped car body and other shapes of metals scrap. It makes high density bales, square,octagon, cylinder different shapes are available.
By this way, the cost of transportation and burning loss can be reduced a lot. It also makes much efficient storage.
Hydraulic Scrap Baling Press Machine is mainly used in metal plants,recycling yards,waste recovery and metal refining industry. Size of compressing chamber and finished bale can be customized.
This is the hottest model for medium or large scrap yards. With double biggest main cylinders, it runs with less cycle time even for such wide chamber size. Fully automatic running with PLC system & remote control.
1) Hydraulic drive, no need special foundataion
2) Upgrade installation standard hydraulic system with better layout
3) Pressing force ranges from 400T to 1000T
4) Customized bale & chamber box size
5) Hardox steel NM500 for whole wearing plate.
◆ Fe, Al, Cu, Cr-Ni Scraps
◆ Ferrous and non-ferrous
◆ Aluminium Extrusions, UBC, Profiles
◆ Rebars, Sheets, Buckets and other Mixed Scraps
